The Carl Larsson Experiment: Part 6 Windows, Tricky Tricky - Real Good Toys 22 Town Hill Road CC2 Front Opening Kit

Sorry for the long silence. The Holiday Season took a chunk of time and I've been dreading the assembly of the RGT Town Hill Road windows. But I have to see how the windows fit and work before I can start the interior decoration of the door wall. The instructions are a lot to be desired at this point.

Beveled Windows

These little windows are one of the nice architectural features of this dollhouse. Little beveled jewels, if I can pull them off.

Geez! How many times have I read through these instructions???

The instructions make for a tricky process, and after thinking about it, I've decided to modify their assembly by installing the frames directly onto the the outside wall itself, then the jambs and sills to them, to get the correct bevel and have that bevel supported as the glue dries. The instructions have you assemble the windows frames on the table, and then mount them to the wall. Seemed flimsy at best and might make for questionable fitting when installing on the doorwall window openings.

Painted frames, pre-glued to door wall. Side bevel jambs ready to be fitted and glued.

The larger second story window was another bit of thought. There are two jambs that bevel together to make the center jamb, and the instructions didn't give any guidance for that. I used a thin dowel and centrally glued it to give the center jambs something to glue to.

Dowel glued for support of central jambs. Stiles to be fitted in at tops and bottoms.

Windows glued up front and inside. Time for filling and sanding and more painting!

At least I know now I can trim out the inside windows any way I want!

Gosh! When will these windows be done already!!

Retrofit the Kit Tudor Dollhouse: Part 3 It Arrives - Real Good Toys Country Tudor CC15

It has arrived!

A present arrived in the mail in a large box, from myself. Gee, I hope I will be happy!

So now there are no excuses, as in doing and inventory...

Using painter's tape to label the parts listed in the instructions.

Oh my! A lot of parts but labeling gave me a good sense of control! All the little like parts are bagged together, so I just labeled and kept them in their bags.

I learned the door was missing, but that worked out well. I contacted Real Good Toys© by email and they more than promptly sent one out. Now that's service!! They did appreciate I had done inventory. Let that be a lesson to us all!

You can see the instructions with their inventory list at http://cdn.shopify.com/s/files/1/0164/0860/files/CC15.pdf.

Testing the floors, their changes and measurements...

I've already decided I'm lowering the ceiling of the 2nd floor. Even at full scale (1:1), it will still be believable and 1" scale furniture will fit. So I draw preliminary lines that I'm sure will change as I continue the process!

 

Testing the plan for a bay window...

These will be the pieces for the bay window, two Concord room dividers (in different colors) for windows and a disassembled thimble display that will act as a bookcase between them. The bay will jet out from the outside wall about an inch. I'll have to strip the finishes and try to stain them all the same color.

Disappointment: Two different plywood wood types and ...

Since I have limited fabric to use as wallpaper, I was hoping to emulate wainscotting using the kit's wood veneer inside surfaces of the sides, front and back. Unfortunately, the inside front and side panels have different veneers and the back is masonite. Oh well, now I have plan on buying something to create the uniform wainscotting I'm looking for.

Left: front inside panel stained. Center: side inside panel stained. Right: masonite and peak backs.

 

 

INSTRUCTIONS ALTERATION:

The last panel is the new back, now one piece instead of two.

Straying from the directions and parts components, I bought a half sheet of 1/4" aspen plywood that my husband cut a new back panel from. It incorporates the kit's 3/8" plywood peak back and it's back 1/4" masonite panel. Since I'm lowering the 2nd floor ceiling, the kit's back peak will come up short anyway. Keep your fingers crossed it will all work out!

I've taped off the areas the new wainscot panels will go and painted the remaining areas an off-white satin finish. I'm toying with removable wallpaper panels.

...waiting (again!)

So, after much calculation and price configurations, I've ordered 4 sets of precut paneling with chair rail from my favorite dollhouse supply vendor, Manchester Woodworks at http://manchesterdollhouseandwoodworks.com/. Good prices, quick, combined shipping and great communication. Very dependable too.

A #WC1/4 set description from Manchester Woodworks:

• Seven pieces wainscot panels and one chair rail per order.
• Each panel measures 1/16"t x 3-1/2"w x 2-7/8" h. (2mm x 88mm x 73mm).
• Chair rail measures 1/8 x 1/4 x 24" (3mm x 6mm x 609mm).
• 7 panels end to end equal 24-1/2" in length.
• Made of unfinished basswood.

That gives me 28 pieces of precut paneling and 4 pieces of chair rail. Plus I ordered some lovely "Lace Weave" molding (CLA78173), I'm going to use for crown on the 1st floor ceiling.

Retrofitting thoughts:

1) Move the stairs from the 1st floor to the 2nd. More space on the first floor.

2) Some sort of treatment of the floors (even though I have planned paper tile for the 1st (it is removable anyway)).

3) The attic space will be an art studio (oh boy! What am I thinking??).

Oh! I can hardly wait, again!! Get here soon wainscoting and trim!